About JAE Sitemap Terms of Use

TOP > News Release   NewsRelease General Purpose Gigabit Transmission Connectorr"MJ06 Series" 2010/08/04   ::Features Balanced transmission structure ideal for differential transmission. Through-hole location to optimize board wiring pattern. Symmetrical pin structure prevents skew between pair during high-speed differential transmission. Mounting dimensions compatible for parallel usage with compact PCI standard connector defined in IEC61076-4-101. 1.8mm pitch spacing, compatible with high density backplane and midplane. Pin and socket connectors are press-fit (compatible with 0.6mm dia.). Compatible with connector height 9mm (from board), minimum slot distance 17mm. Available in cable connection type.(Please contact us for more information.) Details X Industry's Narrowest Pitch, 0.25mm, Ultra-Thin Coaxial Connector"FI-JP Series" 2010/07/14   ::Features Industry's narrowest pitch, 0.25mm, vertical mating connector; contributes to workability and allows more design freedom for customers. Mated dimensions: 2.5mm depth, 17.2mm width (for 50 pos.), 1.1mm height. Minimized plug size; harnessed assembly can pass through 0.27mm dia. Hinge. Au plating for ground contacts of plug and receptacle ensures stable connection. Anti-noise performance enhanced by ground connection in the center, in addition to both ends. Applicable wire: fine-coaxial wire, 44 AWG (outer dia. 0.25mm max.) and 46 AWG. Receptacle is available in embossed reel compatible with automated mounting. Solder migration prevention structure for receptacle. Details X Industry's Narrowest Pitch and Lowest Height　FPC Connector"FF08 Series" 2010/06/29   ::Features Narrow pitch, space saving FPC connector with 0.2mm pitch, 1.0mm height, and 2.85mm depth. Full length actuator* structure prevents loosening and deformation during mating. It also creates a clear tactile click. ZIF (Zero Insertion Force) structure for easy FPC insertion. Guide for FPC sides prevents mis-alignment by temporarily holding the FPC in place until actuator locks. Applicable FPC thickness: 0.15mm ± 0.02mm. Bottom surface connection type. Board pattern traces are possible under connector (excluding terminal area). Pb-free, halogen-free compliant product. Ni barrier prevents solder wicking. Note*) Actuator: Movable part to fix and hold FPC. Details X Board-to-Cable Connector "FI-DP Series" Compatible With High-Speed Transmission 2010/06/15   ::Features Compatible with DisplayPort (Rev. 1.1a) transmission. Height when mated: 2.0mm (42 position), 8.8mm (58 position) EMI characteristics and board retention strength is improved by the multiple hold-downs (42 pos: 9 points; 58 pos: 14 points) of the socket connector. Socket connector and hold-downs are integrated. Cable connector and base shell touch when mated so cable connector is in contact with the ground on board. The pull bar makes removing the cable easier in limited mounting spaces, and also serves as a lock to prevent unmating caused by vibration and shock. Compatible with discrete wire and fine coaxial wire (coax / twinax). Details X 0.2mm Pitch FPC Connector "FG2 Series" 2010/05/21   ::Features 0.2mm pitch FPC connector, bottom contact structure. LIF (Low Insertion Force) structure, which prevents mis-alignment by temporarily holding the FPC in place during mating. Space-saving type with 1.2mm height, 3.5mm depth (when placed on board), and 0.2mm pitch. User-friendly rotating front flip method actuator structure. (Note *, **) Compatibility with standard FPC thickness 0.2mm ± 0.03mm contributes to cost-savings for customers. Bottom of connector is covered by plastic so board pattern traces are possible. RoHS compliant product. Note *) Front flip method: Method that fixes the FPC by rotating the actuator in the FPC insertion direction. Note **) Actuator: Movable part to fix and hold FPC. Details X Smallest-in-Class Size in the Industry, or MicroSDTM Card "ST10 Series" 2010/04/06   ::Features Push-push structure, standard mounting type connector for the microSD TM card standardized by the SDA. 20% reduced volume compared to our existing push-push product (ST9 Series). (Reduced 14% in height and 6 % in base area.) Balanced EMI control through 4 hold-down grounding points. Slim design with 1.25mm height, 13.2mm width, 14.85mm depth. (Depth including card: 16.75mm) Supplied in embossed tape for automatic mounting. Compatible with second reflow (Note). Halogen free, for environmentally friendliness. Available with card insertion detection structure (D-SW), normally open. Available with lock. Easy card insertion and removal with 1mm push stroke and 3.1mm card ejection length. Card pop-out countermeasure to prevent loss of cards. (Note) Second reflow: Undergo soldering process twice for mounting on both sides of board. Details X High-speed Graphics Transmission Compatible Cable Connector"FI-RE-HLS-M Series" 2010/02/24   ::Features Space savings and improved operability with the top-side un-lock button. Structure enables mating where there is no room to operate side buttons. Mechanical lock to prevent incomplete-insertion and un-mating. Mates with standard FI-R Series receptacle. 100 ohm impedance matching with ground secured through metal cover shell structure. Connection with cable and contact (sold separately) by crimp method, compatible with inexpensive discrete wire. Details X High Reliability "MX39 Series" Connector For Automotive USB 2.0 Applications 2010/02/10   ::Features Connector and cable designed for automotive applications. Transmission performance meets PC level USB 2.0 standard. Noise removed due to double metal shell shielding structure for EMI control. 1 row, 4 position type with 2.2mm side pitch. Angle and straight board connector versions. Angle type with keys to prevent mis-mating is also available. Mechanical lock and twist-resistant structure for mated connector. In addition to board-to-cable type, cable-to-cable type is available for cable relay (allows for easier wiring during car assembly). Harness assembly done at JAE to ensure total reliability and transmission performance. Details X MXM3.0 Compatible Notebook PC Internal Graphics Board Connector "MM70 Series"Connector 2010/01/15   ::Features MXM3.0 standard (PCI-Express2.0 (x 16 lane), VGA, Dual LVDS, Displayport (supports (4 ports). Graphics board can be easily inserted at an angle.. Precision positioning stopper prevents contact failure. Mating area is 0.5mm pitch, with two-layer upper and lower structure. Available in 6.7mm or 4.5 mm height, with 12.2 mm depth and 89.9 mm width. Details X "JN1/JN2 Series"Connector for Machinery and Industrial Equipment 2009/12/15   ::Features Easy and sure mating with push-twist type (Note 1) one-touch lock mechanism. Dust-proof and waterproof conforming to IP67. Superb environment-proof performance such as vibration and oil resistance. Straight and angled types. Can be set in four directions by rotating the plug in 90 degree increments. Compatible with conduit (Note 2) attachment. JN1 is an all plastic lightweight connector, JN2 is reinforced with metal material in part of the outer shell. Plug contacts can be selected from crimp or solder termination types. * Note 1: One-touch lock mechanism enables mating by pushing in, and removal by twisting. * Note 2: Flexible tube that can be added to protect the wires. Details X Lowest Height, Tray type, SIM Card Connector"SF8 Series" 2009/11/24   ::Features Tray type connector for GSM 11.11 standard plug-in SIM card Low profile structure: 1.55mm height, 16.65mm width, 19.30mm depth (26.2mm when tray is inserted) Available in standard A type and reverse B type, to accommodate different mounting needs. Connecter main body is provided in embossed tape (compatible with automated mounting and second reflow), card tray provided in trays (tray is attached to connector main body after main body is mounted to board) 4 grounding hold-downs ensure EMI/ESD control, and add strength to help prevent intermittence caused by dropping Retention lock on tray provides click feeling when mated, easy tray positioning during card insertion/removal, and keeps tray attached to the main connector body. Details X Compact, microSDTM Card Connector"ST1 Shrink Type" 2009/10/20   ::Features Push-slide structure connector for the microSDTM card standardized by the SDA. Balanced EMI control through 4 hold-down grounding points. Slim design with 1.4mm height, 15.5mm depth, 11.9mm width. 40% reduced volume and 20% reduced mounting area, compared to our previous product. Supplied in embossed tape for automatic mounting. Compatible with second reflow due to reduced weight (after surface solder reflow, back surface reflow also possible). Available with and without card insertion detection structure (D-SW), normally open.Part number: ST1-F (with insertion detection structure), ST1-G (without insertion detection structure). Locking structure prevents falling off of cover when dropped. Details X Notebook PC External Graphic Box Connector　DL1 series 2009/10/02   ::Features Can be connected with high-end graphic boards, compatible with PCI Express 2.0 (x 8 lanes). Has terminals supporting USB 2.0 for convenient use with USB. Mating portion with 0.7mm pitch, 2-row structure. Compatible with hot pluging. Easy insertion and removal due to mechanical lock retention structure. No need to consider mating direction since the same connector is on both ends of cable. Available cables: 0.5m, 1m and 2m. Details X Copyright (C) 2002-2010, Japan Aviation Electronics Industry, Ltd. English --- Japanese --- Chinese