 |
TOP |
> |
MX23A Series |
 |
 |
040 contacts, compact type ,waterproof, board-to-cable application connectors MX23A series |
|
|
|
MX23A Series |
|
|
|
|
|
 | Feature |  | |
MX23A connector can be used for wide range water proof equipment including automobiles, motorcycles and so on. This connector has high environmental capability with waterproof structure by sealing in its mating area and by grommet in its wire crimping area for full protection against water. Reverse type pin connector (with pins facing up) is also available in consideration of mounting space.- Low profiled type with board mounting height of 18.3mm and socket connector height of 22.2mm max. (12 to 34pos.)
- Double fin structure with high reliability is adopted for socket contact and large chamfer is prepared in the front-edge side to prevent grommet from damaging.
- Incomplete insertion of socket contact into its housing can be detected with the front cap mounting process.
- Full water poof grommet is used for socket contact crimping area in order to reduce size.
- Water protection seal ring is used in connector´s mating area. It realizes full protection from hands touching on insulator wall.
- Reverse type pin connector (with pins facing up) is also available. (* excluding 12, 36pos.)
- MX23 used for socket contact and dummy pin.
|
|
|
| General specification | | |
| Contact pitch |
2.5 mm |
| Number of positions |
12, 18, 26, 34, 36 |
| Rated current |
3 Amps |
| Dielectric withstanding voltage |
1000 VACr.m.s. (1 minute) |
| Insulation resistance |
100 megohms min. |
| Contact resistance |
10 milliohms max. (initial) |
| Operating temperature range |
-40 deg. C to +125 deg. C |
Applicable cable
(cable type |
AVSS, AVS (partially): 0.3 to 1.25 mm2 |
|
|
|
|
|
|
|
|
|
Notice
|
|
|
