 |
TOP |
> |
What's new |
 | What's new |  | |
Fine-Coax Wire Connector for Portable Devices
"FI-JW Series" Has Been Developed
|
| |
Recently, portable devices have become more compact and slim, so there is demand for a connector that takes up less mounting space and has a more compact, fine-coax wire plug side that can pass through a very small-diameter hinge after harness assembly.
To meet this demand JAE has developed the FI-JW Series connector for AWG#42 and AWG#44 fine-coax wire.
|
|
| |
| |
:: Features
|
- Plug side can pass through a 3.7mm dia. hinge after harness assembly (40 pos., AWG#42).
- Mated dimensions of 3.2mm depth, 17.3mm width (40 pos.), 1.65mm height are achieved.
- Enables stable connection by a secure 0.35 mm effective contact length.
- Achieves low contact resistance at gold plated ground contact points on plug and receptacle.
- Incorporates mis-mating prevention key.
- Enhanced noise resistance characteristic with 6 ground contact points between plug and receptacle.
- Applicable wire: compatible with AWG #42 and #44 fine-coaxial wire.
- Supports automated mounting with embossed tape for receptacle.
- Solder migration prevention structure with Ni barrier on receptacle.
|
|
:: Applicable market
|
| |
Mobile phones, portable devices, etc.
|
:: General specifications |
| |
| |
Items |
Specification and performance |
| 1 |
No. of contacts |
30, 34, 40, 50 pos. |
2 |
Contact resistance |
40 millohms or less (initial) |
3 |
Dielectric withstanding voltage |
AC100V r.m.s. per minute |
| 4 |
Insulation resistance |
100 megaohoms or more. |
| 5 |
Operating temperature |
-40Cel to +85Cel |
| 6 |
Rated current |
AC, DC each 0.25A per pos. |
| 7 |
Pitch |
0.3mm |
| 8 |
Rated Voltage |
AC, DC each 50V per pos. |
| 9 |
Durability |
30 mating cycles |
| 10 |
Applicable Wire |
AWG #42 to #44 |
|
|
|
