| 1 |
Interface connector compatible with the next-generation flat panel interface standard DisplayPort 1.1a.
|
2
|
20 contacts, 1.0mm contact pitch in mating area (0.5mm pitch SMT terminals on receptacle)
|
3
|
Secure shielding with metallic shell (Nickel or tin plating is available for finish of shell. Thickness of gold plating for contact is 0.3um min.).
|
4
|
Board-side receptacle is available in reverse SMT type for reverse mounting and angle SMT type with flange, in addition to the standard angle SMT and through-hole types.
|
5
|
Reinforced-type receptacle available with enhanced metal shell structure, robust against rough handling of cable during mating and unmating. |
| 6 |
Mating height is 6.5mm for angle SMT type board-side receptacle (6.65mm at the thickest area) |
7
|
Excellent transmission with three-row footprint for terminals of through-hole type. |
8
|
Cable-assembled plugs available in 12.2mm height with latch (mechanical lock) for increased connector retention, or 10mm height slim type without latch. |
9
|
2m and 3m plug cable assemblies available.
|
10
|
Cable assembly passed compliance test certification by VESA. (2m) |
| 11 |
Now developing a DP adapter that can be connected to a flat panel compatible with general VGA and DVI. |
